










Descripción del Producto
Excavadora hidráulica Komatsu PC120-6 usada de 2020, anunciada en Guangdong, China. La descripción china la identifica como una máquina de construcción Komatsu 120-6, orientándola a trabajos generales de obra en lugar de configuraciones especializadas para usos municipales o de cantera. Este modelo se suele emplear en tareas de excavación, apertura de zanjas, soporte de tuberías, construcción de carreteras, carga y pequeños o medianos trabajos de movimiento de tierras.
Marca: Komatsu
Modelo: PC120-6
Año: 2020
Ubicación: Guangdong, China
Estado: Usada
Aplicaciones habituales: construcción, excavación, apertura de zanjas, carga, preparación de terrenos
Antes de finalizar la compra, los compradores deberían revisar las horas de operación, el desgaste del tren de rodaje, el rendimiento hidráulico, el estado del cucharón y la documentación de la máquina. Se recomienda una prueba de operación previa a la compra para confirmar el estado general. FairTradeMachinery ofrece anuncios de maquinaria pesada usada para contratistas, distribuidores y propietarios de proyectos que buscan opciones prácticas de excavadoras Komatsu.
| Especificaciones | Valor |
|---|---|
| No. | 1189833 |
| Tonnage (tons) | 12 |
| Working weight (kg) | 12030 |
| Bucket capacity (m³) | 0.5 |
| Rod length (mm) | 2100 |
| power | Traditional power |
| manufacturer | Joint venture/Import |
| bucket | backhoe |
| Engine type | Komatsu Komatsu SAA4D95LE-3 |
| Rated power (kw/rpm) | 64/2200 |
| Cooling mode | water-cooling |
| Displacement (L) | 3.26 |
| Working form | Direct injection, turbocharged, intercooled diesel engine |
| Ground specific pressure (Kpa) | 0.39kg/c㎡ |
| Rotation speed (rpm) | 11 |
| Climbing ability (%) | 70/30 ° |
| Bucket digging force (kN) | 8800 |
| Rod digging force (kN) | 6300 |
| Travel speed (km/h) | 2.7-5.5 |
| Maximum flow of main pump (l/min) | 226L/min |
| Traveling Hydraulic Circuit (Mpa) | 355kg/c㎡ |
| Rotary Hydraulic Circuit (Mpa) | 295kg/c㎡ |
| Control Hydraulic Circuit (Mpa) | 30kg/c㎡ |
| Hydraulic crushing pipeline is standard | no |
| Working Hydraulic Circuit (Mpa) | 325kg/c㎡ |
| Fuel Tank (L) | 247 |
| Hydraulic Tank (L) | 90 |
| Engine Oil changes (L) | 11 |
| Coolant (L) | 13.4 |
| Total transport length (mm) | 7599 |
| Total transport height (mm) | 2175 |
| Full cab height (mm) | 2175 |
| Counterweight ground clearance (mm) | 855 |
| Minimum ground clearance (mm) | 400 |
| Back end turning radius (mm) | 2110 |
| Total track length (mm) | 3610 |
| Track gauge (mm) | 1990 |
| Track plate width (mm) | 500 |
| Track ground length (mm) | 2880 |
| Maximum digging radius (mm) | 8290 |
| Maximum digging depth (mm) | 5520 |
| Maximum excavation height (mm) | 8610 |
| Maximum unloading height (mm) | 6170 |
| Maximum vertical digging depth (mm) | 4940 |
| Bulldozer lift or depth (mm) | No bulldozer |
| Maximum excavation radius of stop surface (mm) | 8170 |
| Maximum effective digging depth (mm) | 5315 |
WhatsApp
Facebook










FAQs
WhatsApp