










Descripción del Producto
Excavadora hidráulica usada Komatsu PC450-8 año 2012, ofrecida desde Zhejiang, China. La máquina se describe como una unidad en funcionamiento actualmente en sitio, apta para compradores que buscan una excavadora pesada disponible para evaluación in situ en trabajos de movimiento de tierras, apoyo minero, construcción de carreteras o preparación de terrenos a gran escala. Como excavadora de cadenas Komatsu de tamaño medio ampliamente reconocida, la PC450-8 es frecuentemente elegida para tareas exigentes de excavación y carga; no obstante, el estado final debe confirmarse mediante inspección directa y los registros operativos disponibles.
Datos verificados: Komatsu, modelo PC450-8, año 2012, condición usada y en funcionamiento, ubicación Zhejiang, China, disponible para inspección en sitio. Los compradores que requieran información sobre accesorios, estado del tren de rodaje, historial de mantenimiento u operación de prueba deben solicitar información detallada antes de la compra. FairTradeMachinery presenta esta unidad como una opción práctica para contratistas y equipos de operaciones que buscan una clase probada de excavadora usada con acceso a inspección local.
| Especificaciones | Valor |
|---|---|
| No. | 1188964 |
| Tonnage (tons) | 45 |
| Working weight (kg) | 45125 |
| Bucket capacity (m³) | 2.1 |
| Boom length (mm) | 7060 |
| Rod length (mm) | 3380 |
| Country of origin | Japan |
| power | Traditional power |
| manufacturer | Joint venture/Import |
| bucket | backhoe |
| Engine type | Komatsu SAA6D125E-5 |
| Rated power (kw/rpm) | 257/1900 |
| Cooling mode | water-cooling |
| Displacement (L) | 11.04 |
| Working form | 6-cylinder, water-cooled, direct injection, turbocharged, electronic speed regulation; Cylinder diameter × stroke :125mm×150mm |
| Ground specific pressure (Kpa) | 84.1 |
| Rotation speed (rpm) | 9.1 |
| Climbing ability (%) | 70/35 ° |
| Bucket digging force (kN) | 278 |
| Rod digging force (kN) | 233 |
| Travel speed (km/h) | 3.0/4.2/5.5 |
| Rotary hydraulic motor type | Axial plunger type ×1 |
| Type of walking hydraulic motor | Axial plunger type x 2 |
| Maximum flow of main pump (l/min) | 690 |
| Traveling Hydraulic Circuit (Mpa) | 37.3 |
| Rotary Hydraulic Circuit (Mpa) | 27.9 |
| Control Hydraulic Circuit (Mpa) | 3.2 Pilot oil circuit |
| Hydraulic crushing pipeline is standard | no |
| Bucket cylinders - Number × diameter × stroke (mm) | 160 * 1270 * 110 |
| Bucket rod cylinders - Number × diameter × stroke (mm) | 185 * 1985 * 130 |
| Boom cylinders - Number × diameter × stroke (mm) | 160 * 1570 * 110 |
| Fuel Tank (L) | 650 |
| Hydraulic Tank (L) | 248 |
| Engine Oil changes (L) | 37 |
| Coolant (L) | 36 |
| Total transport length (mm) | 12040 |
| Total transport width (mm) | 3580(3082 when contracted) |
| Total transport height (mm) | 3660 |
| Full cab height (mm) | 3285 |
| Counterweight ground clearance (mm) | 1320 |
| Minimum ground clearance (mm) | 555 |
| Back end turning radius (mm) | 3605 |
| Total track length (mm) | 5055 |
| Track gauge (mm) | 2890(2392 when contracted) |
| Track plate width (mm) | 600 |
| Total track width (mm) | 3490(2992 when contracted) |
| Track ground length (mm) | 4020 |
| Maximum digging radius (mm) | 12005 |
| Maximum digging depth (mm) | 7790 |
| Maximum excavation height (mm) | 10925 |
| Maximum unloading height (mm) | 7625 |
| Maximum vertical digging depth (mm) | 6600 |
| Bulldozer lift or depth (mm) | No dodging plate |
| Maximum excavation radius of stop surface (mm) | 11800 |
WhatsApp
Facebook










FAQs
WhatsApp