Descripción del Producto
Engineered for high-volume material handling, this 2016 LiuGong ZL50CN wheel loader delivers robust performance through a 162kW power plant operating at 2200 rpm. Water-cooled reliability ensures consistent thermal management during extended duty cycles. Hydraulic architecture operates at 17MPa rated working pressure, driving a 167kN digging force and 175kN maximum tractive force—critical metrics for penetrating compacted materials and maintaining traction on challenging terrain.
Built on a proven four-wheel drive chassis with 16,800kg operating weight, this unit offers exceptional stability for its 5,000kg rated load capacity. Bucket versatility ranges from 1.8 to 5.6m³, accommodating diverse material densities. Cycle efficiency is quantified through an 11.5-second ternary sum: 6.5s lift, 1.5s unloading, 3.5s lowering. The 7,598mm turning radius and 2,976mm bucket width balance maneuverability with productivity in confined loading zones.
Currently located in Baoding, Hebei, this machine represents LiuGong's commitment to durable construction through accessible Chinese engineering. Dual 300L fluid capacities (fuel and hydraulic) minimize refilling downtime during multi-shift operations.
| Especificaciones | Valor |
|---|---|
| No. | 1022434 |
| Engine type | |
| Rated power (kw/rpm) | 162/2200 |
| Cooling mode | water-cooling |
| Cylinder diameter × stroke (mm) | |
| Working form | |
| Bucket capacity (m³) | 1.8-5.6 |
| Rated load (tons) | |
| Rated load (kg) | 5000 |
| Digging force (lifting force) (kN) | 167 |
| Machine operating weight (kg) | 16800 |
| Max - Unloading height (mm) | |
| Unloading distance (mm) | |
| Maximum tractive force (kN) | 175 |
| Distance from rear axle to hinge point (mm) | 2227 |
| Loading position height (mm) | |
| Fuel Tank (L) | 300 |
| Hydraulic Tank (L) | 300 |
| Coolant (L) | 54 |
| Wheelbase (mm) | |
| Wheel base (mm) | 2150 |
| Minimum ground clearance (mm) | 485 |
| Machine length (mm) | |
| Machine width (mm) | |
| Machine height (mm) | |
| Maximum length (mm) | |
| Bucket width (mm) | 2976 |
| Drive axle model | Four-wheel drive |
| Steering Angle | |
| Minimum turning radius of outer wheel center line | |
| Turning radius - Outside of bucket (mm) | 7598 |
| Rated working pressure (bars) | 17MPa |
| Boom cylinder diameter × stroke (mm×mm) | |
| Bucket cylinder diameter × stroke (mm×mm) | |
| Lift (s) | 6.5 |
| Unloading (s) | 1.5 |
| Lower empty bucket (s) | 3.5 |
| Ternary sum (s) | 11.5 |
| Gearbox brand and model | |
| Speed 1 gear (km/h) | |
| Speed 2 (km/h) | 0-34 |
WhatsApp
Facebook
FAQs
WhatsApp